Please check the product specifications in the table below:
| Playtime |
Up to 45 hours with ANC off Up to 30 hours with ANC on |
| Charging time |
2.5 hours - 100% 20 min - for 5 hours of playtime |
| Battery | 900 mAh 3.7V |
| Battery level indicator |
yes (voice prompt by short pressing Power button) |
| Bluetooth | 5.0 |
| Bluetooth chipset | QCC 3034 |
| Bluetooth audio codec | AAC, SBC |
| Compatibility | With all BT enabled devices |
| Connector | 3.5 mm audio connector (AUX support) |
| Signal range | 33 feet / 10 m |
| Drivers for PC/laptop | Not needed (?)The Bluetooth module in TREBLAB earbuds speaker adheres to the Bluetooth SIG protocols and therefore should be just "plug and play". TREBLAB earbuds are featured with Bluetooth 5.0 CSR, Bluetooth profiles: HFP, HSP, A2DP, AVRCP and connect with all Bluetooth enabled devices of this version and higher without any drivers. |
| Using wall charger (?) We recommend charging earphones from a USB port of any laptop/PC or a power bank |
Input Voltage: 5V Amperage: at least 1 A |
| IPX Water resistance level | IPX4 |
| Noise cancellation type | Active, Hybrid (4 mics) |
| Noise cancellation (dB) | 35dB |
| Phone calls | 2 Built-in mic with ENC (?)ENC (Environmental Noise Cancellation) blocks external noise to help the user have a better talking experience |
| Voice prompts | + |
| Multipoint connection | + |
| Voice assistant |
Siri/Google VA |
| Frequency response | 20 Hz – 20 kHz |
| Speaker Sensitivity (decibel output) | 114dB±3dB |
| Speaker power |
15mW |
| Earpads | Protein leather (non-removable) |
| Earpad size |
outer: 98x81mm inner: 61x38mm |
| Earbud driver size | 40 mm diameter |
| Dimensions | 192 x 162 x 81mm / 7.56 x 6.38 x 3.19 in |
| Weight | 246 g / 8.68 oz / 0.54 lb |
| Color | Metallic gray |
| On-device control |
Three buttons: · On / Off · ANC/Transparency mode · Bluetooth Touch control: · Volume control · Play / Pause · Next / Previous · Calls · Ambient aware · Voice Assistant |
If some spec was not listed here and you'd like to find it out, please click Contact Us. We will gladly answer your questions!