STEP 1
1) Ensure the earbuds are in pairing mode(?) LED indicators should start flashing and not charging at the moment.
2) Make sure the following conditions are met:
- Proper environment (no antennas, steel, a lot of other BT devices nearby)
- Clear path (no solid obstructions: walls, a lot of furniture, etc.)
- No other electronics on body (no walkie-talkies etc.)
- The headset is not running out of power.
3) If the issue persists, please try to connect the earbuds to another device.
Note 1: You can only connect and play audio from one device at a time. But you can store up to seven connected devices in the headphones pairing list.
Note 2: When you turn the earbuds ON, they will try to reconnect with the most-recently connected device. If reconnection does not happen automatically, the earbuds will try to find the next device in the pairing list.
STEP 2
Please reset your earbuds by taking the following steps:
1. Go to the Bluetooth settings on your device and remove TREBLAB X3 Pro's from the list.
2. Turn the earbuds OFF.
3. Press and hold the MFB button on both earbuds for 11 seconds. You will see the purple light and hear the sound prompt.
4. Put them back into the charging case.
5. Now the earphones are restored to the factory settings and ready for use.
6. Take the earbuds off from the charging case. They will turn ON automatically and connect to each other.
7. Pair the earbuds to the device.
Note:
When you take the earbuds out of the charging case for the first time after the reset is done, the LED indicator lights on the earbuds will flash rapidly. This means that the earbuds are establishing a connection between one another.
Once reset is done, please repeat STEP 1.
STEP 3
If the issue still persists and you want our further assistance, please click Contact Us. We will help!